Fort Lauderdale |
Unified Land Development Code |
Article II. ZONING DISTRICT REQUIREMENTS |
Section 47-7. INDUSTRIAL ZONING DISTRICTS |
§ 47-7.30. Table of dimensional requirements for the I district. (Note A)
Latest version.
-
Requirements I Maximum height (ft.) 150 Minimum lot size
Minimum lot widthNone Maximum FAR None Minimum front yard (ft.): When contiguous to residential property 30 All others 5* Minimum side yard (ft.): When contiguous to residential property 30 All others All side yards abutting a street: 5 ft.
All other side yards: None except when any portion of a structure is greater in height than 100 ft. up to maximum height of 150 ft., that portion of the structure shall be set back an additional 1 ft. for each 1 ft. of building height over 100 ft.
Minimum rear yard (ft.): When contiguous to residential property 30 All others All rear yards abutting a street: 5 ft.
All other rear yards: None except when any portion of a structure is greater in height than 100 ft. up to maximum height of 150 ft., that portion of the structure shall be set back an additional 1 ft. for each 1 ft. of building height over 100 ft.
Note A: Dimensional regulations may be subject to additional requirements, see Section 47-23, Specific Location Requirements, and Section 47-25, Development Review Criteria.
*Where the height of a building exceeds nine feet measured from the ground floor elevation, that portion of the building may extend into the front yard area.
(Ord. No. C-97-19, § 1(47-7.5), 6-18-97)