§ 47-5.30. Table of dimensional requirements for the RS-4.4 district. (Note A)

Requirements	RS-4.4
Maximum density	4.4 du/net ac.
Minimum lot size	10,000 sq. ft.
Maximum structure height	35 ft.
Maximum structure length	None
Minimum lot width	75 ft.   *100 ft. when abutting a waterway on any side
Minimum floor area	1,250 sq. ft.
Minimum front yard	25 ft.   Special minimum front yard setbacks: Coral Isles—15 ft. Nurmi Isles—20 ft. Pelican Isle—20 ft.
Minimum corner yard	25% of lot width, but not greater than 25 ft.   25 ft. when abutting a waterway
Minimum side yard	10 ft. - up to 22 ft. in height   Where a building exceeds 22 ft. in height that portion of the building shall be set back an additional 1 foot per foot of building height above 22 ft.   25 ft. when abutting a waterway
Minimum rear yard	15 ft.   25 ft. when abutting a waterway
Minimum distance between buildings	None
	Lot Size	**Maximum Lot Coverage	**Maximum Floor Area Ratio
	≤10,000 sf	50%	0.75
Lot coverage and FAR	10,001—15,000 sf	45%	0.75
	>15,000 sf	40%	0.60

 

Note A: Dimensional requirements may be subject to additional regulations, see Section 47-23, Specific Location Requirements, and Section 47-25, Development Review Criteria.

 *Allowances for modifications of lot widths may be permitted in accordance with the requirements of Section 47-23.10, Specific Location Requirements.

**An increase in the maximum FAR or lot coverage may be permitted subject to the requirements of a site plan level III, see Section 47-24.2.

(Ord. No. C-97-19, § 1(47-5.4), 6-18-97)